TALURIT® Round Aluminium End Stopsmade of Aluminium alloynot used for lifting
Version:0.9 StartHTML:0000000105 EndHTML:0000006747 StartFragment:0000000141 EndFragment:0000006707
GENERAL DESCRIPTION
The aluminium ferrules, type T and type TKH correspond to the European standard for turnback ferrules (also known as ferrule secured eye terminations, FSET). The standard is EN 13411-3. The ferrule system is specifi ed in Appendix 1.
Theferrules are extruded seamlessly over mandrel and the aluminium alloy is EN AW-5051A according to EN 573-3.
There is aconical ferrule called TK which is similar to the TKH but without the inspection hole. The TK ferrule does not comply with the EN standard. If used in any application the selection table is the same as for TKH. Special care has to be taken when using the TK ferrule due to lack of inspection hole.
APPLICATIONS
The aluminium ferrules are the most commonly used ferrules on the market today. They have a vast variety of
applications, especially in the lifting gear industry. The T ferrules and TKH ferrules are thoroughly specifi ed and very well
defi ned for many diff erent wire rope applications. Four diff erent cases are tested and verifi ed according to the standard,
EN 13411-3. The ferrules can be used for fi bre core single layer wire ropes, steel core single layer wire ropes, rotation
resistant wire ropes and spiral strand ropes.
Always use new wire ropes.
THE CORRECT SIZE OF THE SLING EYE
If a thimble is not used, the distance from the swaged ferrule to the inner bearing point of the soft eye must be at least
15 x the wire rope diameter (D), as per the fi gure. The width of the eye without load shall be approximately half its
length. When using a pin or a hook, the minimum eye size should be verifi ed with the formulas below.
TO BE NOTED
The turnback ferrule system is easy to use. It is quick, safe and has proved itself to be totally reliable. It is also more
effi cient than most other swaging methods on the market and has been tested and verifi ed according to type testing
requirements. Only valid for up to 1960 grade wire rope.
TK ferrules do not correspond to standard mentioned above but have been tested and verifi ed by Talurit (please follow our swaging instructions as per the technical data sheet).
Talurit AB · Amalia Jönssons gata 29 · 421 31 Västra Frölunda · Sweden · VAT
-
-
Anfeng Lifting & Rigging is authorized non-exclusive distributor in China for TALURIT swagers, aluminum ferrules, copper ferrules, stainless steel ferrules, carbon steel ferrules and more.
About Anfeng Lifting & Rigging
Based in Shanghai Free Trade Zone, Shanghai Anfeng Lifting & Rigging Ltd. is an experienced technical and sales company specialized in supplying webbing slings, round slings, wire rope and slings, chains, rigging accessories and more.
