iso 9001 6 ton lever chain hoist
"
Industrial Lifting 6 Ton Chain Lever Hoist Grade 100
6 tonne Lever Hoist VIT-II competitive Lever Hoist VIT-II with industrial performance Product Description Lever Hoist type VIT-II is manufactured by VITALI-INTL Lifting Equipment Ltd, meets all pertinent world standards. The whole series of Lever Hoist VIT-II contains 0.75 tonne, 1 tonne, 1.5 tonne, 3 tonne, 6 tonne and 9 tonne in load capacity. They are mainly exported to American and European markets. They are competitive lever hoists with industrial performance. High
1 -20 Ton Chain Pulley Blocks CK type with hand chain
1tonne Chain Block K-II top-of-the-line chain block Product Description Chain Block type K-II is top-of-the-line chain block. The hoists are manufactured by VITALI-INTL Lifting Equipment Ltd, based on European and American standards. The whole series of Chain Block type K-II (top-of-the-line chain block) contains 0.25 tonne, 0.5 tonne, 1 tonne, 1.5 tonne, 2 tonne, 3 tonne, 3.2 tonne, 5 tonne, 7.5 tonne, 10 tonne, 15 tonne, 20 tonne, 30 tonne and 50 tonne in load capacity.
38mm Double Leg Wire Rope Sling With Flemish Eye Sleeve And Thimble
38mm Double-leg steel wire rope slings, swaged wire rope with Flemish Eye Sleeve and Thimble, steel core, equipped with Master Link Two-leg wire rope sling assembly, steel core Product Description Our Double-leg Wire Rope Sling Assemblies (with steel core) feature 6 x 37 (a) + IWRC Construction, with 1770MPa in tension strength. The wire ropes with soft eye are swaged, which means that the end has been folded back on itself, and spliced into the rope. An eye on its own is
1.3 Tonne 12mm Single Leg Wire Rope Sling , Soft Eye Wire Rope Sling
12mm Single leg steel wire rope slings, fibre core, swaged wire rope with Flemish Eye Sleeve and Thimble, equipped with Master Link Single leg wire rope sling assembly, fibre core, Soft Eye and Eye Sling Product Description We are supplying Single Leg Wire Rope Sling Assemblies (with fibre core) that comply with EN 13414-1: 2003, EN 13411-3: 2004, GB/T 16762-2009, GB/T 14737-2009 requirements. The wire rope slings feature 6 x 37 Construction, Extra Improved Plow Steel (EIPS)
GB/T 16762 Four Leg Wire Rope Sling , 32mm Galvanized Cable Sling With Loops
32mm Four-leg steel wire rope slings, fibre core, swaged wire rope with Flemish Eye Sleeve and Thimble, equipped with Master Link Four-leg wire rope sling assembly, fibre core, Soft Eye and Eye Sling Description All our four-leg steel wire rope sling assemblies are produced according to our DNV Quality Management Approved System. The sling assemblies with fibre core feature 6 x 37 +FC construction, with 1670MPa in tensile strength. Each leg is a single soft eye wire rope
8 Tonne DNV 2.7-1 Wire Rope Sling Assembly , 4 Leg Wire Rope Sling
8 tonne DNV 2.7-1 Offshore Container Lifting Sling, four-leg swaged wire rope sling, sling assembly, lifting set DNV 2.7-1 Offshore Container Lifting Sling Set Offshore Container are mainly used on offshore oil platforms. They are much different with normal ISO container. Not only because strict safety requirements have to be met, but also because they are mainly transported by small ship and lifted / unloaded by crane. When DNV revised the DNV 2.7-1 Certification Note, the
EN 13411-3 Soft Eye 30mm Steel Core Swaged Wire Rope
30mm Swaged wire rope sling, steel core, soft eye, can be equipped with Flemish Eye Sleeve or Aluminium Ferrule and Thimble Standard Eye and Thimble Eye Wire Rope Sling, steel core Product Description Our Swaged Wire Rope Slings with steel core feature 6 x 19, 6 x 37 or 8 x 61 Construction, Extra Improved Plow Steel (EIPS) wire rope with an Independent Wire Rope Core (IWRC). Soft Eye Wire Ropes can be hand spliced at either end, or mechanically pressed and secured with a
12mm Wire Rope Sling Assembly , Hand Spliced Wire Rope Sling
12mm Hand Spliced Wire Rope Sling, steel core, can be equipped with Thimble Standard Eye and Thimble Eye Wire Rope Sling, steel core Product Description A Hand Spliced Wire Rope Sling is constructed when the end of a single-part wire rope is bent back along the rope to create a looped eye shape, and strands at the end of this eye are then tucked back inside the body of the rope by hand. The eye shape helps to create a sling that can be used for a variety of applications. Our
50mm Wire Rope Sling Assembly With Open Spelter Socket
50mm Wire Rope Sling with Open Spelter Socket (with cotter pin), long-term durability Wire Rope Sling and Wire Rope End Fittings Description Our Open Spelter Socket is equipped with cotter pin. They are made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. This type of end fittings for wire rope sling is made depending on the specific
