alloy steel chain hoisting slings
"
1 Inch Standard WLL 8.5 Tons Wide Body Shackles
1" Standard Bow Shackle with safety screw pin, type JB, WLL 8.5 tons, Anchor Shackle Screw Pin Anchor / Bow Shackles Product Description Bow shackles and anchor shackles are both used interchangeably and refer to a type of shackle with a larger, round O shaped bow. On a screw pin bow shackle, a threaded pin is inserted through the ears and tightened down. They are not recommended for permanent or long-term installations. The shackles have a large rounded shape that allows
1-1/8" WLL 9.5 Tonne Wide Body Shackles With Safety Bolt
1-1/8" Bolt Type Shackle, Standard Bow Shackle with safety bolt, WLL 9.5 tonne, Anchor Bow Shackle Bolt Type Anchor / Bow Shackles Description Bolt type shackles are practical in many rigging applications where the anchor bolt is expected to experience some rotation. The tightening nut and the cotter pin eliminate the need to tighten the pin prior to every lift or movement of a load, so bolt type shackles are excellent choices for semi-permanent or long-term installations, or
RR-C-271D 0.75'' WLL 4.75 Tons Pin Bow Shackle
3/4" Bolt Type Shackle, Standard Bow Shackle with safety bolt, WLL 4.75 tons, Anchor Bow Shackle Bolt Type Anchor / Bow Shackles Description Our Bolt Type Bow Shackle is a bow shackle with a safety bolt. A bolt type shackle is a more secure version used in rigging that features the combination of a bolt and nut located alongside a cotter pin. The shackle offers a double safety which prevents accidental unscrewing of the pin. Our Bolt Type Shackle is suitable for both one-leg
1-1/8" WLL 9.5 Tonne Wide Body Shackles With Safety Bolt
1-1/8" Bolt Type Shackle, Standard Bow Shackle with safety bolt, WLL 9.5 tonne, Anchor Bow Shackle Bolt Type Anchor / Bow Shackles Description Bolt type shackles are practical in many rigging applications where the anchor bolt is expected to experience some rotation. The tightening nut and the cotter pin eliminate the need to tighten the pin prior to every lift or movement of a load, so bolt type shackles are excellent choices for semi-permanent or long-term installations, or
UM Aluminum Ferrule
TALURIT aluminium ferrule UM (Ultragrip) smaller in diameter after pressing than TALURIT T ferrule Product Description The UM ferrule become smaller in diameter after pressing than the T ferrule. For economic reasons, the UM ferrule can be used as an alternative to the T ferrule at wire rope grades, up to and including 1960. The UM ferrule are available from stock in sizes from 09-90. Art. No: UM 09 UM 90 The aluminium ferrule UM (Ultragrip) are made from a special
EN 13411-3 Round Wire Rope End Stop 3.1 T And TKH Ferrules
3.1 T AND TKH FERRULES EUROPEAN STANDARD SYSTEM EN 13411-3 Product Description 3.1 T AND TKH FERRULES TKH ferrule EUROPEAN STANDARD SYSTEM EN 13411-3 GENERAL DESCRIPTION The aluminium ferrules, type T and type TKH correspond to the European standard for turnback ferrules (also known as ferrule secured eye terminations, FSET). The standard is EN 13411-3. The ferrule system is specified in Appendix 1. The ferrules are extruded seamlessly over mandrel and the aluminium alloy
Lifting And Rigging Purposes Screw Pin Bow Shackles Excellent Corrosion Resistance
On a screw pin bow shackle, a threaded pin is inserted through the ears and tightened down. The screw pin configuration is best for use in applications that are temporary, or require repeated and/or quick connections and disconnections. The shackles have a large rounded shape that allows them to take loads from many directions without developing significant side load. They are not recommended for permanent or long-term installations. Bow shackles and anchor shackles are both
EN 13411-3 Aluminium Ferrules For Wire Rope
TALUKON Ferrule Aluminum Ferrule, a conical ferrule made for sling application Product Description TALUKON is a conical ferrule made for sling application. It has an inspection hole to ensure the short end of the wire rope is correctly positioned after pressing. It also has a very tight fit compared to other conical ferrules on the market. The wire rope termination will not get caught during lifting and will simply slide of an obstacle. This will minimize the risk of
EN 13411-3 High Grade Copper Wire Ferrules
TALURIT Copper Turnback Ferrule (TCU) used with stainless steel wire rope to avoid galvanic corrosion Product Description Copper ferrules are intended as an alternative to Stainless steel ferrules in high corrosive environments. The ferrule is to be used with stainless steel wire rope to avoid galvanic corrosion. The copper ferrule (TCU) is intended for stainless steel wire rope in corrosive environment. It is a good alternative to stainless steel ferrules is where there is
