galvanized steel wire rope slings
"
Fibre Core Hand Spliced Wire Rope Sling Assembly Galvanized Steel Material
Hand Spliced Wire Rope Sling (Fibre Core) Product Description A Hand Spliced Wire Rope Sling is constructed when the end of a single-part wire rope is bent back along the rope to create a looped eye shape, and strands at the end of this eye are then tucked back inside the body of the rope by hand. The eye shape helps to create a sling that can be used for a variety of applications. Hand-spliced ropes can be complete without the need for a thimble, while they often being
EN 13411-4 70mm Wire Rope Sling Assembly , 5:1 Short Bow Socket
70mm Wire Rope Sling with Short Bow Socket, Closed Spelter Socket Sling, long-term durability Wire Rope Sling and Wire Rope End Fittings Product Description Short Bow Socket is a closed spelter socket. The socket is made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. Our Short Bow Socket meets RR-S-550D (type B) requirements and is
1-5/8" Wire Rope Sling Assembly , 5:1 Closed Swage Socket
1-5/8" Wire Rope Sling with Closed Spelter Socket, long-term durability Wire Rope Sling and Wire Rope End Fittings Description Closed spelter socket is a common type of socket. It has a hole that is made for a pin or bolt. Closed and open spelter socket also named as poured socket. Our Closed Spelter Socket is made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization
50mm Wire Rope Sling Assembly With Open Spelter Socket
50mm Wire Rope Sling with Open Spelter Socket (with cotter pin), long-term durability Wire Rope Sling and Wire Rope End Fittings Description Our Open Spelter Socket is equipped with cotter pin. They are made from high tensile, quenched and tempered cast steel, with a different chemical composition and with extremely high mechanical properties, while galvanization ensures its long-term durability. This type of end fittings for wire rope sling is made depending on the specific
5:1 90mm Wire Rope Sling Assembly , EN 13411-4 Open Spelter Socket
90mm Wire Rope Sling with Open Spelter Socket, long-term durability Wire Rope Sling and Wire Rope End Fittings Product Description The open design spelter socket is attached to the end of a wire rope cable by pouring zinc or resin to create the termination. This hardens to hold the socket into place. This type of wire rope slings are used in many wire rope and structural strand termination applications where a high strength, permanent end attachment is required. They are
12mm Wire Rope Sling Assembly , Hand Spliced Wire Rope Sling
12mm Hand Spliced Wire Rope Sling, steel core, can be equipped with Thimble Standard Eye and Thimble Eye Wire Rope Sling, steel core Product Description A Hand Spliced Wire Rope Sling is constructed when the end of a single-part wire rope is bent back along the rope to create a looped eye shape, and strands at the end of this eye are then tucked back inside the body of the rope by hand. The eye shape helps to create a sling that can be used for a variety of applications. Our
DNV 2.7-1 4 Leg Wire Rope Sling
20 tonne DNV 2.7-1 Offshore Container Lifting Sling, four-leg swaged wire rope sling, sling assembly, lifting set DNV 2.7-1 Offshore Container Lifting Sling Set All of our DNV 2.7-1 Offshore Container Lifting Slings are produced according to our DNV Quality management approved system. When DNV revised the DNV 2.7-1 Certification Note, the most extensive changes were made in the lifting sling requirements. The sling is a four or five legged wire rope lifting sling fitted with
8 Tonne DNV 2.7-1 Wire Rope Sling Assembly , 4 Leg Wire Rope Sling
8 tonne DNV 2.7-1 Offshore Container Lifting Sling, four-leg swaged wire rope sling, sling assembly, lifting set DNV 2.7-1 Offshore Container Lifting Sling Set Offshore Container are mainly used on offshore oil platforms. They are much different with normal ISO container. Not only because strict safety requirements have to be met, but also because they are mainly transported by small ship and lifted / unloaded by crane. When DNV revised the DNV 2.7-1 Certification Note, the
12 Tonne Wire Rope Sling Assembly
12 tonne DNV 2.7-1 Offshore Container Lifting Sling, four-leg swaged wire rope sling, sling assembly, lifting set DNV 2.7-1 Offshore Container Lifting Sling Set When DNV revised the DNV 2.7-1 Certification Note, the most extensive changes were made in the lifting sling requirements. The sling is a four or five legged wire rope lifting sling fitted with a quad assembly and shackles. Each component of the lifting sling is specified to the capacity of the container. The sling is
