Product Overview
The 38mm 6x19 Galvanized Steel Wire Rope is a wire rope product specified with a nominal diameter of 38mm, a 6x19 construction, and a galvanized surface finish. The specified supply length is 50FT.
It is intended for crane main hoist applications where wire rope diameter, construction, tensile properties, breaking force, and compatibility with the hoisting system must be carefully evaluated.
The 6x19 construction consists of six strands, with a nominal 19-wire designation in each strand. The actual strand arrangement and core configuration should be confirmed against the manufacturer's technical specification.
The galvanized finish provides a zinc coating to help protect the steel wires against corrosion. Its corrosion performance depends on the coating specification and the operating environment.
For crane operators, equipment manufacturers, and industrial lifting equipment distributors, selecting the correct wire rope requires more than matching the diameter. Rope construction, core type, rope grade, lay direction, drum configuration, and sheave compatibility must also be checked.
Key Product Information:
-
Product Type: Galvanized Steel Wire Rope
-
Nominal Diameter: 38mm
-
Rope Construction: 6x19
-
Surface Finish: Galvanized
-
Supplied Length: 50FT
-
Intended Application: Crane Main Hoist
-
Technical Configuration: Subject to manufacturer specification
3. Product Features
38mm Nominal Rope Diameter
The 38mm diameter specification is intended for equipment designed to accommodate this rope size. Actual diameter tolerance should be checked against the applicable manufacturing standard and purchaser requirements.
6x19 Wire Rope Construction
The 6x19 construction provides six strands arranged around a rope core. The specific wire arrangement influences rope flexibility, abrasion characteristics, and fatigue performance.
Buyers should confirm the exact construction before matching the rope with crane equipment.
Galvanized Surface Protection
The galvanized finish provides a zinc protective coating on the steel wires. This helps reduce corrosion exposure during storage and operation, depending on coating thickness, environmental conditions, and maintenance.
50FT Supplied Length
The specified length is 50 feet, approximately 15.24 meters. Buyers should confirm whether this refers to the finished supplied length or a required cut length.
Crane Main Hoist Application
The wire rope is intended for consideration in crane main hoist systems. Final selection must follow the crane manufacturer's requirements and the applicable lifting equipment standards.
4. Technical Specifications
| Parameter |
Specification |
| Product Name |
Galvanized Steel Wire Rope |
| Nominal Diameter |
38mm |
| Rope Construction |
6x19 |
| Surface Finish |
Galvanized |
| Supplied Length |
50FT / Approx. 15.24m |
| Application |
Crane Main Hoist |
| Core Type |
To Be Confirmed |
| Rope Grade / Tensile Strength |
To Be Confirmed |
| Lay Direction |
To Be Confirmed |
| Lay Type |
To Be Confirmed |
| Minimum Breaking Force |
Refer to Manufacturer's Datasheet |
| Diameter Tolerance |
According to Applicable Standard |
| Packaging |
According to Order Requirements |
Important: The core type, rope grade, minimum breaking force, and applicable standard must be confirmed before quotation and installation. A 6x19 designation alone does not establish the complete rope specification or its suitability for a particular crane.
5. Wire Rope Construction and Working Principle
A steel wire rope is manufactured by twisting individual steel wires into strands and arranging multiple strands around a central core.
For a 6x19 construction:
-
Six outer strands form the main rope structure.
-
Each strand has a nominal 19-wire designation.
-
The central core supports the strands and contributes to the rope's structural performance.
-
The galvanized coating provides a protective zinc layer on the steel wires.
During crane operation, the wire rope transfers tensile force between the hoisting mechanism and the suspended load.
Its service performance depends on the rope construction, loading conditions, drum and sheave diameters, bending cycles, lubrication, installation, and inspection.
6. Applications
Crane Main Hoist Systems
Used for consideration in crane main hoist systems where the equipment design specifies a compatible 38mm wire rope configuration.
Industrial Overhead Cranes
Potential application in industrial lifting equipment, subject to the crane manufacturer's rope requirements and approved configuration.
Port and Cargo Handling Equipment
May be considered for compatible crane and material-handling equipment operating in port and cargo handling environments.
Heavy Industrial Lifting Equipment
Suitable for evaluation in industrial lifting systems where the required rope diameter, construction, and performance specifications match.
The above applications are subject to equipment compatibility and the manufacturer's approved rope specification. Do not substitute a wire rope based on diameter alone.
7. How to Select the Correct Crane Main Hoist Wire Rope
Before purchasing a 38mm galvanized steel wire rope, buyers should verify the following technical details:
1. Rope Diameter
Confirm that 38mm is the required nominal diameter and check the permitted diameter tolerance.
2. Rope Construction
Confirm whether 6x19 is the exact construction required by the crane manufacturer.
3. Core Type
Check whether the equipment requires a fiber core or an independent wire rope core (IWRC), or another specified core configuration.
4. Rope Grade
Confirm the required tensile grade and minimum breaking force from the equipment documentation.
5. Lay Direction and Type
Check the required right-hand or left-hand lay, as well as regular lay or Lang's lay.
6. Drum and Sheave Compatibility
Confirm the rope diameter, drum groove dimensions, sheave diameter, and reeving arrangement.
7. Supplied Length
Confirm whether 50FT is the required total length, cut length, or sample quantity.
8. End Termination
Specify whether the rope requires plain ends, pressed sockets, wedge sockets, or other approved end fittings.
8. Galvanized Steel Wire Rope vs. Ungalvanized Steel Wire Rope
| Comparison Item |
Galvanized Wire Rope |
Ungalvanized Wire Rope |
| Surface Treatment |
Zinc-coated steel wires |
No galvanized zinc coating |
| Corrosion Protection |
Provides additional corrosion protection |
Depends on base material and other protection |
| Typical Selection |
Environments where zinc coating is required |
Applications with different coating or lubrication requirements |
| Maintenance |
Requires regular inspection and maintenance |
Requires regular inspection and maintenance |
| Selection Factor |
Coating specification and environment |
Material and operating environment |
The choice should be based on the crane manufacturer's specification, environmental exposure, maintenance plan, and required rope performance.
9. Manufacturing and Quality Inspection
For crane main hoist wire rope procurement, buyers should request technical documents that match the actual supplied product.
Recommended quality inspection items include:
-
Nominal rope diameter measurement
-
Rope construction verification
-
Core type verification
-
Tensile grade confirmation
-
Galvanized coating inspection
-
Minimum breaking force documentation
-
Rope lay direction and lay type inspection
-
Supplied length measurement
-
Applicable standard and test documentation
-
Packaging and identification verification
Inspection requirements should be agreed upon before production or shipment.
10. Installation, Inspection and Maintenance
Correct installation and routine inspection are essential for crane wire rope performance.
-
Confirm the rope specification before installation.
-
Follow the crane manufacturer's reeving and installation instructions.
-
Avoid twisting, kinking, and improper handling during installation.
-
Check drum and sheave grooves for compatibility and damage.
-
Inspect for broken wires, corrosion, deformation, wear, and diameter reduction.
-
Apply suitable rope lubricant according to the manufacturer's instructions.
-
Follow the applicable inspection and discard criteria.
-
Remove the rope from service when it reaches the relevant discard criteria or shows unacceptable damage.
Wire rope replacement decisions should follow the applicable crane standard, equipment manufacturer's instructions, and competent inspection procedures.
11. Frequently Asked Questions
Q1: What does 38mm 6x19 galvanized steel wire rope mean?
38mm refers to the nominal rope diameter. 6x19 indicates six strands with a nominal 19-wire designation per strand. Galvanized means the steel wires have a zinc protective coating.
Q2: What is the length of this wire rope?
The specified length is 50FT, equivalent to approximately 15.24 meters. Please confirm the required finished length before ordering.
Q3: Can this wire rope be used for a crane main hoist?
It is intended for crane main hoist applications, but actual suitability depends on the crane manufacturer's required rope construction, core type, rope grade, breaking force, lay direction, and equipment configuration.
Q4: What core types are available?
The available core types depend on the manufacturer's product range. Common configurations include fiber core and independent wire rope core (IWRC). Please specify the required core type when requesting a quotation.
Q5: What is the minimum breaking force of a 38mm 6x19 wire rope?
The minimum breaking force cannot be determined from diameter and construction alone. It depends on rope grade, core type, wire arrangement, and the applicable manufacturing standard. Please request the manufacturer's datasheet.
Q6: Can you supply different lengths?
Please provide your required length and order quantity. Availability of cut lengths and customized supply should be confirmed according to production and packaging arrangements.
Q7: What information is needed for a quotation?
Please provide rope diameter, construction, core type, rope grade, lay direction, required length, end termination, applicable standard, and destination country.
12. Request a Quotation
Looking for 38mm galvanized steel wire rope for a crane main hoist system?
We welcome inquiries from crane manufacturers, lifting equipment distributors, industrial equipment suppliers, and project procurement teams.
To help us identify the correct rope configuration, please provide:
-
Required diameter: 38mm or other size
-
Rope construction: 6x19 or specified alternative
-
Core type: FC / IWRC / other
-
Rope grade and minimum breaking force
-
Galvanized coating requirements
-
Lay direction and lay type
-
Required length: 50FT or customized length
-
End termination requirements
-
Order quantity
-
Crane model or equipment application
Send your technical specifications or existing wire rope photos for product matching and quotation.