wire rope lifting sling assembly
"
Fibre Core Hand Spliced Wire Rope Sling Assembly Galvanized Steel Material
Hand Spliced Wire Rope Sling (Fibre Core) Product Description A Hand Spliced Wire Rope Sling is constructed when the end of a single-part wire rope is bent back along the rope to create a looped eye shape, and strands at the end of this eye are then tucked back inside the body of the rope by hand. The eye shape helps to create a sling that can be used for a variety of applications. Hand-spliced ropes can be complete without the need for a thimble, while they often being
Flemish Eye Sleeve Thimble Wire Rope Sling Assembly 1670 MPa Strength
Single-leg Swaged Wire Rope Sling (Fibre Core) The wire rope slings feature 6 x 37+ FC construction classification, with 1670 MPa in tensile strength. Product Description - Surface treatment of wire ropes can be galvanized and grease free, galvanized with grease and uncoated with grease. - The wire rope structure, tensile strength and working load limit could be customized upon request. - Safety factor is 5:1 for the sling, 4:1 for the Master Link and Hook, and 6:1 for the
EN 13411-1 9/16" Thimble Eye Wire Rope Sling Low Carbon Mild Steel
9/16" Wire Rope Sling with Standard Thimble Eye, Eye Sling, greater protection against wear and deformation of the wire rope eye Wire Rope Sling and Wire Rope attachment Product Description Our Standard Thimbles are galvanized thimbles according to EN 13411-1 for making a 'hard' eye with wire rope, it creates a loop at wire rope ends. The thimbles provide a means for connecting wire rope to attachments. They are good for light duty rigging applications and ideally suited for
FF-T-276B Mild Steel 3 Inch Thimble Wire Rope Sling ,Thimble Eye Sling
3" Wire Rope Sling with Heavy Duty Thimble, Eye Sling, greater protection against wear and deformation of the wire rope eye Wire Rope Sling and Wire Rope attachment Product Description Our Heavy Duty Thimble is designed for use with high-performance wire rope. The thimbles meet the performance requirements of Federal Specification FF-T-276B Type III. The thimble creates a 'hard' eye at wire rope ends, making it features greater protection against wear and deformation of the
50mm Galvanized Steel Wire Rope Sling Assembly With Open Spelter Socket
Spelter Socket (Open Type) Description 1. Reference standard: EN 13411-4: 2002 2. Safety Factor: 5:1. 3. The above metioned wire ropes feature 6 x 19 + IWRC, 6 x 37(a) + IWRC, 6 x 61 (a) + IWRC and 8 x 61 (a) + IWRC construction, with 1770 MPa in tensile strength. 4. The wire rope structure, tensile strength and working load limit could be customized upon request. Our Open Spelter Socket is also named as poured socket, equipped with cotter pin. Product Code Diameter(mm) WLL(T
1770 MPa Steel Core Wire Rope Slings With Four Legs
Two-leg Swaged Wire Rope Sling (Steel Core) The wire rope slings feature 6 x 37 (a)+ IWRC construction classification, with 1770 MPa in tensile strength. Product Description - Surface treatment of wire ropes can be galvanized and grease free,galvanized with grease and uncoated with grease. - The wire rope structure, tensile strength and working load limit could be customized upon request. - Safety factor is 5:1 for the sling, 4:1 for the Master Link and Hook, and 6:1 for the
12mm Mechanical Spliced Wire Rope Sling Assembly Soft Eye Fibre Core
Soft Eye Mechanical Spliced Wire Rope Sling (Fibre Core) Product Description These slings have both ends that have been folded back on itself, mechanically pressed and secured with a ferrule. This creates an eye-shaped loop, which can be utilized for a range of applications. This soft loop has been left natural. A hard-eye would be a loop thats supported along the inside of the loop using a metal thimble. A wire rope sling that has soft eyes at each end will be less
EN 13411-4 Closed Type Wire Rope Sling Assembly With Spelter Socket
Spelter Socket (Closed Type) Main features: 1. Reference standard: EN 13411-4: 2002 2. Safety Factor: 5:1. 3. The above metioned wire ropes feature6 x 19 + IWRC, 6 x 37 (a) + IWRC, 6 x 61 (a) + IWRC and 8 x 61 (a) + IWRC construction, with 1770 MPa in tensile strength. 4. The wire rope structure, tensile strength and working load limit could be customized upon request. Closed pelter socket also named as poured socket, with a hole that is made for a pin or bolt. They are made
Grade 80 Two-Leg Chain Sling Assemblies Heavy-Duty Lifting Solutions
Product Overview The Grade 80 two-leg chain sling assemblies generally consist of a large Master Link at top with a shortening Clevis Grab Hook for leg length adjustment joined with a Chain Connector, and a Clevis Self-Locking Hook fitted to the bottom of the chain leg. Our Grade 80 chains and chain components are manufactured by heat treated alloy steel, and meet the requirements of ISO1835, ISO3077 and EN818-2 standards. These chains and components are designed to be high
