custom solutions lifting slings
"
EN 573-3 Aluminium Alloy Round End Stops
TALURIT Round Aluminium End Stops made of Aluminium alloy not used for lifting Product Description Ends stops (R) are not allowed to use for lifting applications. The expected strength regarding this end-termination is approximately 50% of the MBL of the wire rope (informative only). Accordingly, verifying tests must be performed to secure the strength of the application. Art. No: R 01,5 R 32 The R end stop is a round end stop made of Aluminium alloy, AW-5051A, same as for
EN 573-3 Wire Rope End Stop
TALURIT T / TS Aluminium Turnback Ferrule Product Description The ORIGINAL in mechanical splicing! The T aluminium turnback ferrule system is easy and reliable to use. It is quick, safe and has proved itself to be totally reliable. It is far more efficient than all other swaging methods on the market. Art. No: T 01 T 152 The TALURIT T-ferrule is the original in mechanical splicing and has laid the grounds for the European standard. Nowadays, the T-ferrule correspond to the
Round Aluminium Alloy Wire Rope End Stop 3.1 T / TKH Ferrules
TALURIT Round Aluminium End Stops made of Aluminium alloy not used for lifting MATCHING WIRE ROPE TO FERRULE Selection of the correct ferrule is to take account of: -The measured rope diameter -The rope type (and core) -The nominal fill factor, f (or metallic cross-sectional area factor, C) of the rope. Very important for fibre core ropes! Case 1 For single layer round strand ropes with fibre core and cable-laid ropes having a fill factor of at least 0,36 (C0,283) and max 0
12 Tonne WLL Yellow Safety Anchor Bow Shackle With Bolt-Type Design
1-1/4" Bolt Type Shackle, Standard Bow Shackle with safety bolt, WLL 12 tonne, Anchor Bow Shackle Bolt Type Anchor / Bow Shackles Product Description Bolt Type Bow Shackle: Secure and Durable Rigging Solution Our Bolt Type Bow Shackle is engineered with a safety bolt design, ensuring enhanced security and reliability. Each shackle is crafted through a quenching and tempering process, utilizing high-quality carbon steel for the bow and alloy steel for the pins, guaranteeing
UM Aluminum Ferrule
TALURIT aluminium ferrule UM (Ultragrip) smaller in diameter after pressing than TALURIT T ferrule Product Description The UM ferrule become smaller in diameter after pressing than the T ferrule. For economic reasons, the UM ferrule can be used as an alternative to the T ferrule at wire rope grades, up to and including 1960. The UM ferrule are available from stock in sizes from 09-90. Art. No: UM 09 UM 90 The aluminium ferrule UM (Ultragrip) are made from a special
Aluminium Alloy 3.1 T And TKH Wire Ferrules EN 13411-3
3.1 T AND TKH FERRULES EUROPEAN STANDARD SYSTEM EN 13411-3 Product Description Version:0.9 StartHTML:0000000105 EndHTML:0000005414 StartFragment:0000000141 EndFragment:0000005374 Case 1 For single layer round strand ropes with fi bre core and cable laid ropes having a fi lling factor greater than 0,45 (C>0,353) and for single layer round strand ropes with metallic core and for rotation-resistant round strand ropes having a fi ll factor up to 0,62 (C0,487), a fer rule
Bolt Type Omega Anchor Shackle (0.5-250 Ton WLL) | For Maximum Security & Extreme Loads
For the most critical, high-stakes lifting and mooring operations, the standard screw pin shackle is not enough. Introducing the Bolt Type Omega Anchor Shackle, engineered for permanent or semi-permanent applications where supreme security and unparalleled strength are non-negotiable. With a massive Working Load Limit (WLL) range from 0.5 to 250 tons, this shackle is the trusted connection point for heavy industries across New Zealand's ports, Europe's offshore wind farms,
FE Clevis Grab Hook With Pear Link Electric Boat Winch With Strap Breaking Load 7350 Kg Black Zinc Plated
Product Description: Our Ratchet Tie Down Straps is equipped with an ET Slip Hook with Latch Breaking Load of 5000 kg, making it perfect for securing heavy equipment and cargo. The CA1 CA2 Chain Extension with D-ring Breaking Load is also a great feature of this product, with a breaking load of 7350 kg, it can definitely keep your cargo or equipment safe and secure during transport. Our Ratchet Tie Down Straps is finished with a Zinc Plated coating, giving it a sleek and
