custom solutions lifting slings
"
Polyester Ratchet Buckle Tie Down Strap Endless EN 12195-2EN
Ratchet Buckle Endless Tie Down Strap Product Description By being able to wrap the ratchet strap around the load and then "feed it" back into itself, endless ratchet straps will make sure your cargo gets from point A to point B held together. Features and Benefits Used for securing/lashing and fastening loads. All our ratchets conform to EN 12195-2:2000 safety performance requirements. Quick release mechanism for easy use. Produced from 100% polyester material,
Cam Buckle Endless Tie Down Strap 2" For Securing / Lashing Fastening Loads
Cam Buckle Endless Tie Down Strap Description By being able to wrap the ratchet strap around the load and then "feed it" back into itself, endless ratchet straps will make sure your cargo gets from point A to point B held together. Company profile Based in Shanghai Free Trade Zone, Shanghai Anfeng Lifting & Rigging Ltd. is an experienced technical and sales company specialized in supplying webbing slings, round slings, wire rope and slings, chains, rigging accessories and
EN 13411-3 High Grade Copper Wire Ferrules
TALURIT Copper Turnback Ferrule (TCU) used with stainless steel wire rope to avoid galvanic corrosion Product Description Copper ferrules are intended as an alternative to Stainless steel ferrules in high corrosive environments. The ferrule is to be used with stainless steel wire rope to avoid galvanic corrosion. The copper ferrule (TCU) is intended for stainless steel wire rope in corrosive environment. It is a good alternative to stainless steel ferrules is where there is
EN 13411-3 Round Wire Rope End Stop 3.1 T And TKH Ferrules
3.1 T AND TKH FERRULES EUROPEAN STANDARD SYSTEM EN 13411-3 Product Description 3.1 T AND TKH FERRULES TKH ferrule EUROPEAN STANDARD SYSTEM EN 13411-3 GENERAL DESCRIPTION The aluminium ferrules, type T and type TKH correspond to the European standard for turnback ferrules (also known as ferrule secured eye terminations, FSET). The standard is EN 13411-3. The ferrule system is specified in Appendix 1. The ferrules are extruded seamlessly over mandrel and the aluminium alloy
EN 573-3 Aluminium Alloy Round End Stops
TALURIT Round Aluminium End Stops made of Aluminium alloy not used for lifting Product Description Ends stops (R) are not allowed to use for lifting applications. The expected strength regarding this end-termination is approximately 50% of the MBL of the wire rope (informative only). Accordingly, verifying tests must be performed to secure the strength of the application. Art. No: R 01,5 R 32 The R end stop is a round end stop made of Aluminium alloy, AW-5051A, same as for
EN 573-3 Wire Rope End Stop
TALURIT T / TS Aluminium Turnback Ferrule Product Description The ORIGINAL in mechanical splicing! The T aluminium turnback ferrule system is easy and reliable to use. It is quick, safe and has proved itself to be totally reliable. It is far more efficient than all other swaging methods on the market. Art. No: T 01 T 152 The TALURIT T-ferrule is the original in mechanical splicing and has laid the grounds for the European standard. Nowadays, the T-ferrule correspond to the
Round Aluminium Alloy Wire Rope End Stop 3.1 T / TKH Ferrules
TALURIT Round Aluminium End Stops made of Aluminium alloy not used for lifting MATCHING WIRE ROPE TO FERRULE Selection of the correct ferrule is to take account of: -The measured rope diameter -The rope type (and core) -The nominal fill factor, f (or metallic cross-sectional area factor, C) of the rope. Very important for fibre core ropes! Case 1 For single layer round strand ropes with fibre core and cable-laid ropes having a fill factor of at least 0,36 (C0,283) and max 0
12 Tonne WLL Yellow Safety Anchor Bow Shackle With Bolt-Type Design
1-1/4" Bolt Type Shackle, Standard Bow Shackle with safety bolt, WLL 12 tonne, Anchor Bow Shackle Bolt Type Anchor / Bow Shackles Product Description Bolt Type Bow Shackle: Secure and Durable Rigging Solution Our Bolt Type Bow Shackle is engineered with a safety bolt design, ensuring enhanced security and reliability. Each shackle is crafted through a quenching and tempering process, utilizing high-quality carbon steel for the bow and alloy steel for the pins, guaranteeing
UM Aluminum Ferrule
TALURIT aluminium ferrule UM (Ultragrip) smaller in diameter after pressing than TALURIT T ferrule Product Description The UM ferrule become smaller in diameter after pressing than the T ferrule. For economic reasons, the UM ferrule can be used as an alternative to the T ferrule at wire rope grades, up to and including 1960. The UM ferrule are available from stock in sizes from 09-90. Art. No: UM 09 UM 90 The aluminium ferrule UM (Ultragrip) are made from a special
